Lenovo System x3850 X6 Installation And Service Manual page 693

Yes
Automatically notify support
No
Alert Category
Critical - Memory
SNMP Trap ID
41
CIM Information
Prefix: PLAT ID: 0794
User Response
This is a UEFI detected event. The UEFI diagnostic code for this event can be found in the logged
IMM message text. Please refer to the UEFI diagnostic code in the "UEFI diagnostic code" section of
the Info Center for the appropriate user response.
Related links
– Finding the UEFI (POST) error code
• 806f000f-220102ff : Subsystem [MemoryElementName] has insufficient memory for operation.
IMM has reported that the usable Memory is insufficient for operation. (ABR Status, Firmware Error, Sys
Boot Status, X8 PCIe1 Firm, X8 PCIe2 Firm)
May also be shown as 806f000f220102ff or 0x806f000f220102ff
Severity
Error
Serviceable
Yes
Automatically notify support
No
Alert Category
Critical - Memory
SNMP Trap ID
41
CIM Information
Prefix: PLAT ID: 0132
User Response
This is a UEFI detected event. The UEFI diagnostic code for this event can be found in the logged
IMM message text. Please refer to the UEFI diagnostic code in the "UEFI diagnostic code" section of
the Info Center for the appropriate user response.
• 806f000f-220103ff : The System [ComputerSystemElementName] encountered firmware error -
unrecoverable boot device failure.
IMM has reported that System Firmware Error Unrecoverable boot device failure has occurred. (ABR
Status, Firmware Error, Sys Boot Status, X8 PCIe1 Firm, X8 PCIe2 Firm)
May also be shown as 806f000f220103ff or 0x806f000f220103ff
Severity
Error
Serviceable
Yes
Appendix C. Integrated management module II (IMM2) error messages
679