Lenovo System x3850 X6 Installation And Service Manual page 308

Table 61. Installation sequence for the six compute books configuration for an 8-socket server (continued)
Top node
Compute
(bay 1)
book
5
6
Table 62. Installation sequence for the eight compute books configuration for an 8-socket server
Top node
Compute
(bay 1)
book
compute
1
book 1
2
3
4
5
6
7
8
• For more information about the compute book, see "Compute book" on page 29. For more information
about installing DIMMs, see "Installing a memory module" on page 46.
• For a list of supported devices, see
To install the compute book, complete the following steps:
Step 1. Reinstall the microprocessor and heat sink on the new compute book (see "Replacing a
microprocessor and heat sink" on page 287).
Step 2. Reinstall the DIMMs (see "Replacing a memory module" on page 247).
Step 3. Replace the compute book covers. Align the cover over the rear of the compute book and slide it
forward (toward the front of the compute book) until it is seated in place.
Step 4. Reinstall the fans (see "Replacing a hot-swap fan assembly" on page 260).
Step 5. Align the compute book with the slot on the server and slide it in the server. Place one hand under
the center of the compute book to support it while sliding it into the server.
294
System x3850 X6 and x3950 X6 Installation and Service Guide
Top node Top node
(bay 2) (bay 3)
Top node Top node
(bay 2) (bay 3)
compute
book 2
compute
book 3
http://www.lenovo.com/serverproven/
Bottom
Top node node (bay
(bay 4) 1)
Bottom Bottom
node (bay node (bay
4) 1)
compute
book 4
compute
book 5
Bottom Bottom Bottom
node (bay node (bay node (bay
2) 3) 4)
compute
book 5
compute
book 6
Bottom Bottom Bottom
node (bay node (bay node (bay
2) 3) 4)
compute
book 6
compute
book 7
compute
book 8
.