Lenovo System x3850 X6 Installation And Service Manual page 354

Table 63. LCD display panel messages (continued)
Message
SYSTEM ON
WAITING ON UEFI
UEFI: MEASUR.IMG
UEFI: SIG.CHK.PR
UEFI: SIG.CHK.BK
UEFI: UPDATE PRI
UEFI: UPDATE BKP
UEFI: END SEC
UEFI: START PEI
UEFI: MEM INIT
340
System x3850 X6 and x3950 X6 Installation and Service Guide
Amount of time before
the system timeout if no
Description activity
The system is on.
After 1 minute
The microprocessor
has not attempted
to fetch from UEFI
ROM.
UEFI has not After 1 minute
fetched code.
UEFI is running. After 2 minutes
Verifying the After 2 minutes
signature of the
primary bank.
Verifying the After 2 minutes
signature of the
backup bank.
UEFI is updating the After 2 minutes
primary bank.
UEFI is updating the After 2 minutes
backup bank.
UEFI is running. After 2 minutes
UEFI is running. After 2 minutes
MRC is running. After 2 minutes
Action
Inspect the
microprocessor (s).
1. Restart the server.
2. Flash the UEFI
firmware.
3. Clear CMOS.
1. Restart the server.
2. Flash the UEFI
firmware.
3. Clear CMOS.
Flash the UEFI primary
bank.
Flash the UEFI backup
bank.
1. Restart the server.
2. Flash the UEFI
firmware.
3. Clear CMOS.
1. Restart the server.
2. Flash the UEFI
firmware.
3. Clear CMOS.
1. Restart the server.
2. Flash the UEFI
firmware.
3. Clear CMOS.
1. Restart the server.
2. Flash the UEFI
firmware.
3. Clear CMOS.
1. Inspect the memory
in the compute
books.
2. Check the IMM log.