Lenovo System x3850 X6 Installation And Service Manual page 580

PS Heavy Load: The system will throttle to lower the load. Information only; no action is required.
• 8003010c-2581ffff : Sensor [SensorElementName] has asserted.
IMM has reported a SMI Lane Failover or a Non-Auth Dimm failure.
May also be shown as 8003010c2581ffff or 0x8003010c2581ffff
Severity
Info
Serviceable
No
Automatically notify support
No
Alert Category
System - Other
SNMP Trap ID
CIM Information
Prefix: PLAT ID: 0508
User Response
This is a UEFI detected event. The UEFI diagnostic code for this event can be found in the logged
IMM message text. Please refer to the UEFI diagnostic code in the "UEFI diagnostic code" section of
the Info Center for the appropriate user response.
Related links
– Finding the UEFI (POST) error code
• 8003010d-2101ffff : Sensor [SensorElementName] has asserted.
IMM has lost communication with the eXFlash IPMI Proxy Service. The eXFlash DIMM device status is
unknown.
May also be shown as 8003010d2101ffff or 0x8003010d2101ffff
Severity
Info
Serviceable
No
Automatically notify support
No
Alert Category
System - Other
SNMP Trap ID
CIM Information
Prefix: PLAT ID: 0508
User Response
Check the status of the IPMI Proxy Service within the OS to ensure proper operation. Please refer to
the Intallation and Service Guide for the eXFlash IPMI Proxy Service that came with your eXFlash
DIMM.
• 8003010e-2581ffff : Sensor [SensorElementName] has asserted.
IMM has reported that the memory size has changed.
566
System x3850 X6 and x3950 X6 Installation and Service Guide