Alert Category
Critical - Power
SNMP Trap ID
4
CIM Information
Prefix: PLAT ID: 0086
User Response
1. Check the log for additional Power Supply Failure.
2. follow steps for detailed power supply events
Related links
– Solving power problems
– Installing power supplies
– Removing a 1400-watt or 900-watt hot-swap power supply
– Removing a 750-watt -48 volt to -60 volt dc power supply
– Replacing a 1400-watt or 900-watt hot-swap power supply
– Replacing a 750-watt -48 volt to -60 volt dc power supply
• 806f0108-0a04ffff : [PowerSupplyElementName] has Failed.
IMM has detected a Fault on Power Supply 4.
May also be shown as 806f01080a04ffff or 0x806f01080a04ffff
Severity
Error
Serviceable
Yes
Automatically notify support
Yes
Alert Category
Critical - Power
SNMP Trap ID
4
CIM Information
Prefix: PLAT ID: 0086
User Response
1. Check the log for additional Power Supply Failure.
2. Replace the Power Supply, if needed
Related links
– Solving power problems
– Installing power supplies
– Removing a 1400-watt or 900-watt hot-swap power supply
– Removing a 750-watt -48 volt to -60 volt dc power supply
– Replacing a 1400-watt or 900-watt hot-swap power supply
– Replacing a 750-watt -48 volt to -60 volt dc power supply
• 806f0109-1381ffff : [PowerSupplyElementName] has been Power Cycled.
System has been power cycled.
May also be shown as 806f01091381ffff or 0x806f01091381ffff
Severity
Appendix C. Integrated management module II (IMM2) error messages
699