Lenovo System x3850 X6 Installation And Service Manual page 651

Related links
– Finding the UEFI (POST) error code
• 8007020f-2582ffff : Sensor [SensorElementName] has transitioned to critical from a less severe
state.
IMM has reported a critical state where sufficient I/O Resources could not be allocated.
May also be shown as 8007020f2582ffff or 0x8007020f2582ffff
Severity
Error
Serviceable
Yes
Automatically notify support
No
Alert Category
Critical - Other
SNMP Trap ID
50
CIM Information
Prefix: PLAT ID: 0522
User Response
This is a UEFI detected event. The UEFI diagnostic code for this event can be found in the logged
IMM message text. Please refer to the UEFI diagnostic code in the "UEFI diagnostic code" section of
the Info Center for the appropriate user response.
Related links
– Finding the UEFI (POST) error code
• 80070219-0701ffff : Sensor [SensorElementName] has transitioned to critical from a less severe
state.
The UEFI detected a critical System Board Fault.
May also be shown as 800702190701ffff or 0x800702190701ffff
Severity
Error
Serviceable
Yes
Automatically notify support
No
Alert Category
Critical - Other
SNMP Trap ID
50
CIM Information
Prefix: PLAT ID: 0522
User Response
This is a UEFI detected event. The UEFI diagnostic code for this event can be found in the logged
IMM message text. Please refer to the UEFI diagnostic code in the "UEFI diagnostic code" section of
the Info Center for the appropriate user response.
Related links
Appendix C. Integrated management module II (IMM2) error messages
637