Lenovo System x3850 X6 Installation And Service Manual page 770

3. Check for any other RAID related errors.
4. Replace the drive.
Related links
– Removing 2.5-inch and 1.8-inch hot-swap drives
– Replacing 2.5-inch and 1.8-inch hot-swap drives
• 806f010d-040affff : The [NumericSensorElementName] has been disabled due to a detected fault.
The drive 10 has been disabled (defunct) due to a fault detected by the controller.
May also be shown as 806f010d040affff or 0x806f010d040affff
Severity
Error
Serviceable
Yes
Automatically notify support
Yes
Alert Category
Critical - Hard Disk drive
SNMP Trap ID
5
CIM Information
Prefix: PLAT ID: 0164
User Response
1. Check IBM Support site for Service Bulletins/RETAIN tips related to your particular drive.
2. Check IBM Support site for firmware updates related to your particular drive.
3. Check for any other RAID related errors.
4. Replace the drive.
Related links
– Removing 2.5-inch and 1.8-inch hot-swap drives
– Replacing 2.5-inch and 1.8-inch hot-swap drives
• 806f010d-040bffff : The [NumericSensorElementName] has been disabled due to a detected fault.
The drive 11 has been disabled (defunct) due to a fault detected by the controller.
May also be shown as 806f010d040bffff or 0x806f010d040bffff
Severity
Error
Serviceable
Yes
Automatically notify support
Yes
Alert Category
Critical - Hard Disk drive
SNMP Trap ID
5
CIM Information
Prefix: PLAT ID: 0164
756
System x3850 X6 and x3950 X6 Installation and Service Guide