3. Inspect the dust bellows of the axle joints (ball joints) on the suspension (front and rear) as follows:
Put the vehicle onto a lifting platform with the steering lock disengaged.
•
•
Perform a visual inspection after cleaning.
Note
•
In the vicinity of the brake cover panels, no visual inspection is possible in a small area.
•
Check this area by touch.
The procedure for the front axle is as follows:
•
Turn the front wheels as far as they will go.
•
Perform a visual inspection of the visible surfaces on the left and on the right.
•
After turning the front wheels to the other steering stop, check the other half of each rubber dust
bellows.
top of page
Drive shafts: visual inspection of the boots
Perform a visual inspection of the boots for leaks and
damage.
996420, 996421, 996450, 996451, 996620, 996621, 996650, 996651, 996840, 996841
Axle joints: checking the play and dust bellows
einordnung
111