Printed results are coarse or contain horizontal
stripes
Do the print heads show nozzle clogging?
Carry out a printing test and make sure no nozzle clogging occurs. If nozzle clogging is present, perform
head cleaning.
RELATED LINKS
・
P. 29Printing Tests and Normal Cleaning
・
P. 70Medium/Powerful Cleaning
・
P. 72Manual Cleaning
Have you carried out[Calibrate Sheet Feeding] ?
Large misalignment in the amount of feed of the media may result in printing that seems coarse or con-
tains horizontal stripes. We recommend performing [Calibrate Sheet Feeding] before daily operations and
when changing the media type.
RELATED LINKS
・
P. 31Correcting the Media Feed
Have you carried out [Bidirectional adjustment] ?
We recommend performing [Bidirectional adjustment] before daily operations and when changing the me-
dia type. The optimal adjustment value may vary, depending mainly on the thickness of the media.
RELATED LINKS
・
P. 27Bidirectional Adjustment
Is the temperature of the room too low?
The heater may not warm up sufficiently when the ambient temperature is less than 20°C (68°F). Also,
even when the heater warms up, an adequate effect may not be obtained if the media is thoroughly chil-
led. Before printing, allow the media to come to room temperature.
Is the printer installed in a level and stable location?
Never install the machine in a location where it is tilted or where it may wobble or experience vibration.
Also make sure that the print heads are not exposed to moving air.
Is the printer installed in a location out of direct sunlight?
Never install in a location exposed to direct sunlight.
Is the media loaded and set up correctly?
If the media is not loaded and set up correctly, printing may be adversely affected. Make sure the media is
loaded and set up correctly.
Output Quality Problems
87