Trap Manager - Supermicro SSE-G24-TG4 User Manual

1/10 and 10-Gigabit Layer 2/3 Ethernet Switches User's Manual
Table 5-21. SNMP Security Settings Page Parameters (Continued)
Parameter
Privacy Key
Storage Type

Trap Manager

Clicking the T
RAP
which configures the set of management targets that must receive notifications. The
parameters for this page are shown in
Parameter
Notify Name
Notify Tag
Notify Type
Storage Type
Description
Privacy Key is an indication of whether or not messages sent on behalf of this
user to/from the SNMP are protected from disclosure.
Storage Type can be configured as Volatile or Non-Volatile.
Figure 5-28. SNMP Trap Settings Page
M tab brings up the SNMP T
ANAGER
Table 5-22. SNMP Trap Settings Page Parameters
Description
Notify Name is a unique identifier associated with the entry.
Notify Tag contains a single tag value, which is used to select entries in the
Target Address table. Any entry in the Target Address table that contains a tag
value equal to the value of an instance of this Trap Manager, is selected.
The type of notification of the SNMP Trap Settings can be configured as Trap or
Inform.
Storage Type can be configured as Volatile or Non-Volatile.
RAP
Table 5-22.
5-40
S page (Figure
ETTINGS
5-28),