Events - Supermicro SSE-G24-TG4 User Manual

Events

Clicking the E
VENTS
configures RMON events. The parameters for this page are shown in
Table 5-24. Event Configuration Page Parameters
Parameter
Index
Description
Type
Community
Owner
Last Time Sent
Figure 5-31. Event Configuration Settings Page
tab brings up the E
Description
This parameter specifies the index to the Events table.
This parameter specifies a brief description of the event.
This parameter specifies the event configured. This can be a Log, an SNMP
Trap, Both, or None. For the event type to display, TRAP and Log and TRAP
Community must be configured.
This parameter specifies the SNMP community string used for this trap. This is
relevant when an SNMP trap is requested for an event. For event type to display,
TRAP and Log and TRAP Community must be configured. Also make sure the
configured community is active before adding an event on that community.
This parameter indicates the owner of this event.
Denotes the time this event entry last generated an event.
Chapter 5: Web Based Management Utility
C
VENT ONFIGURATIONS
5-43
page (Figure 5-31), which
Table 5-24.