Table 5-20. SNMP Target Parameter Settings Page Parameters (Continued)
Parameter
Security Level
Storage Type
Engine ID
User
Clicking the U
SER
which configures users configured in the SNMP for the User-based Security Model. The
parameters for this page are shown in
Table 5-21. SNMP Security Settings Page Parameters
Parameter
User Name
Authentication
Protocol
Authentication Key
Privacy Protocol
Description
Security Level specifies the level of security used when generating SNMP
messages.
Storage Type can be configured as Volatile or Non-Volatile.
This parameter displays the SNMP Engine ID.
Figure 5-27. SNMP Security Settings Page
tab brings up the SNMP S
Description
User Name is the (User-based Security) model dependent security ID.
The Authentication Protocol is used for authentication.
The Authentication Key is the secret authentication key used for messages sent
on behalf of this user to/from the SNMP.
Privacy Protocol is an indication of whether or not messages sent on behalf of
this user to/from the SNMP are protected from disclosure, and if so, the type of
privacy protocol that is used.
Chapter 5: Web Based Management Utility
S
ECURITY
ETTINGS
Table
5-21.
5-39
page
(Figure
5-27),