Pool Settings - Supermicro SSE-G24-TG4 User Manual

Table 5-83. DHCP Server Settings Page Parameters (Continued)
Parameter
Boot File
Option
Value
Option List table

Pool Settings

Clicking the P
OOL
which allows you to configure the IP address pool that can be used by the DHCP server
to allocate IP addresses. The parameters for this page are shown in
Table 5-84. DHCP Pool Settings Page Parameters
Parameter
Pool ID
Network
Subnet Mask
Start IP
Description
Specifies the file name for booting.
Specifies the DHCP option in the range 1 to 2147483647.
User can specify the Option field value as ASCII or HEX STRING or IP
ADDRESS.
This parameter displays the saved option and value in a switch.
Figure 5-102. DHCP Pool Settings Page
S link brings up the DHCP P
ETTINS
Description
This parameter specifies the pool ID to index among the different subnet pools
configured. The allowed value ranges between 1 and 2147483647.
This parameter specifies the subnet of the IP address in the pool.
This parameter specifies the subnet mask of the IP address in the pool.
This parameter specifies the first IP address in the address pool that is used for
dynamic allocation by the DHCP server.
Chapter 5: Web Based Management Utility
S
OOL
5-123
page (Figure
ETTINGS
Table 5-84.
5-102),