Ipv4 Addrconf - Supermicro SSE-G24-TG4 User Manual

1/10 and 10-Gigabit Layer 2/3 Ethernet Switches User's Manual
Table 5-72. VLAN Interface Basic Settings Page Parameters (Continued)
Parameter
Oper State
Description

IPv4 AddrConf

Clicking the IP
V
(Figure 5-91), which allows you to configure the IP address for L3 VLANs. The
parameters for this page are shown in
Table 5-73. IPv4 Address Configuration Page Parameters
Parameter
Interface VLAN ID
Allocation Protocol
IP Address
Subnet Mask
Address Type
Broadcast Address
Description
This parameter indicates status of VLAN, and whether it is Up or Down.
This parameter specifies interface description string for this VLAN.
Figure 5-91. IPv4 Address Configuration Page
4 A C tab brings up the IP
DDR ONF
Description
This parameter specifies the VLAN interface.
This parameter specifies the protocol which is used to allocate IP address for the
given interface. Options are either Manual, DHCP or RARP.
This parameter specifies the IP Address of the specified interface.
This parameter indicates the mask for the specified IP Address.
This parameter specifies the type of address, which can be Primary or
Secondary.
This parameter displays broadcast address for the interface.
4 A
V DDRESS
Table 5-73.
5-112
C page
ONFIGURATION