Timers; Local As - Supermicro SSE-G24-TG4 User Manual

802.1x
The 802.1x link provides link to the following configuration pages:
• Basic Settings
• Port Settings
•

Timers

•

Local AS

Basic Settings
Clicking the B
ASIC
(Figure 5-81), which displays the various 802.1x Basic Settings parameters. The
parameters for this page are shown in
Table 5-64. 802.1x Basic Settings Page Parameters
Parameter
System Control
802.1x Authentication
Authentication Server This parameter specifies the Authentication Server Location as Remote or Local.
Network Access
Server ID
Protocol Version
Figure 5-81. 802.1x Basic Settings Page
S tab brings up the 802.1
ETTINGS
Description
This parameter starts or shuts down 802.1x in the switch.
This parameter allows enabling or disabling of the 802.1x based port security
feature in the switch.
This parameter specifies the Authenticator ID, which originates the
Access-Request Packets.
This parameter displays the version number.
Chapter 5: Web Based Management Utility
B
X ASIC
Table 5-64.
5-101
S page
ETTINGS