Alarm - Supermicro SSE-G24-TG4 User Manual

1/10 and 10-Gigabit Layer 2/3 Ethernet Switches User's Manual

Alarm

Clicking the A
LARM
which configures RMON Alarm paramters. The parameters for this page are shown in
Table 5-25.
Table 5-25. RMON Alarm Configuration Page Parameters
Parameter
Index
Interval
Variable
Sample Type
Rising Threshold
Falling Threshold
Rising Event Index
Figure 5-32. RMON Alarm Configuration Page
tab brings up the RMON A
Description
This parameter specifies the table index. This value must be in the range from 1
to 65535.
This parameter specifies the time interval for which the alarm monitors the
variable. This value must be in the range from 1 to 4294967296.
This parameter specifies the MIB object on which the alarm is set.
You can set this parameter to an Absolute Value or as just an Incremental Value
of the timer.
If the startup alarm is set as Rising Alarm and this threshold is reached, an alarm
is raised. This value ranges between 0 and 2147483647.
If the startup alarm is set as Falling Alarm and this threshold is reached, an alarm
is raised. This value ranges between 0 and 2147483647. The falling threshold
must be less than the rising threshold.
Indicates the index of the event to be raised when the R
reached. This value must be in the range from 0 to 65535.
C
LARM ONFIGURATION
5-44
page (Figure 5-32),
T is
ISING HRESHOLD