Ipv6 Interface - Supermicro SSE-G24-TG4 User Manual

Table 5-77. IP6 Route Configuration Page Parameters (Continued)
Parameter
Routing Protocol
Gateway
Interface
Distance (Metric)

IPv6 Interface

Clicking the IP
V
(Figure 5-96), which displays the various parameters for the IPv6 Interface. The
parameters for this page are shown in
Table 5-78. IPv6 Interface Settings Page Parameters
Parameter
Port
Admin
Oper
RA Status
Description
This parameter indicates the routing protocol through which the route was
learned, if not manual. This cannot be configured.
This parameter specifies the Next Hop Gateway to reach the IP address.
This parameter indicates the outgoing interface.
This parameter denotes metric value of the destination. It should be in a range
from 1 to 4294967295.
Figure 5-96. IPv6 Interface Settings Page
6 I tab brings up the IP
NTERFACE
Description
This parameter specifies the Index of the VLAN interface.
This parameter indicates the Administrative Status of IPv6 on the Interface.
This parameter specifies the Operational Status of IPv6 on the given Interface,
which is a read-only field.
This parameter indicates the Router Advertisement status on the Interface.
Chapter 5: Web Based Management Utility
6 I
V NTERFACE
Table 5-78.
5-117
S page
ETTINGS