Ethernet Statistics - Supermicro SSE-G24-TG4 User Manual
1/10 and 10-gigabit layer 2/3
1/10-gigabit ethernet switch, 1/10-gigabit ethernet switch, 10/40-gigabit ethernet switch, 10/40-gigabit ethernet switch, 10/40-gigabit ethernet switch
Hide thumbs
Also See for SSE-G24-TG4:
- User manual (268 pages) ,
- Configuration manual (34 pages) ,
- Stacking manual (16 pages)
Table of Contents
Advertisement
Table 5-25. RMON Alarm Configuration Page Parameters (Continued)
Parameter
Falling Event Index
Owner
Ethernet Statistics
Figure 5-33. Ethernet Statistics Configuration Page
Clicking the E
THERNET
C
ONFIGURATION
parameters. The parameters for this page are shown in
Table 5-26. Ethernet Statistics Configuration Page Parameters
Parameter
Index
Port
Octets
Packets
Broadcast Packets
Description
Indicates the index of the event to be raised when the F
reached. This value must be in the range from 0 to 65535.
Specifies the owner of the alarm.
S
tab brings up the E
TATISTICS
page
(Figure
5-33), which configures RMON Ethernet statistics
Description
This parameter specifies the index to the table. This value must be in the range
from 0 to 65535.
This parameter specifies the Ethernet Port.
This parameter specifies the total number of octets received from the network.
This parameter specifies the total number of packets received from the network.
This parameter specifies the total number of broadcast packets received from
the network.
Chapter 5: Web Based Management Utility
THERNET
Table
5-45
ALLING THRESHOLD
S
TATISTICS
5-26.
is
- Quick Links:
- Introduction
Hide quick links:
Advertisement
Table of Contents
