Security - Supermicro SSE-G24-TG4 User Manual

Security

Clicking the S
ECURITY
parameters for this page are shown in
Table 5-91. RIP Security Setting Page Parameters
Parameter
IP Address
Authentication Type
Authentication Key
Figure 5-110. RIP Security Settings Page
tab brings up the RIP S
Description
This parameter displays the active RIP interfaces. You can select the interface
for which you want to configure authentication.
This parameter specifies the authentication type. You can choose No
Authentication, or Simple Password, or the md5 authentication type.
This parameter specifies the key used for authentication if the authentication
type is other than No Authentication.
Chapter 5: Web Based Management Utility
S
ECURITY ETTING
Table 5-12.
5-131
page (Figure 5-110). The