Web Settings - Supermicro SSE-G24-TG4 User Manual

1/10 and 10-Gigabit Layer 2/3 Ethernet Switches User's Manual

WEB Settings

Clicking the W
EB
which displays all basic Web GUI settings. The parameters for this page are shown in
Table 5-13.
Parameter
Session timeout
Statistics Refresh
Timer
Session Privilege
Figure 5-19. Web GUI Settings Page
S link brings up the W
ETTINGS
Table 5-13. Web GUI Settings Page Parameters
Description
This timeout value is used to automatically logout inactive user sessions. The
default value is 5-minutes (600-seconds).
The statistics pages (grouped under "Statistics" node in left side tree) can be set
to auto refresh based on this Statistics Refresh Timer. The default value zero
means no auto refresh by default.
This displays the current privilege level of the logged in user. You can choose to
enter another privilege level using this configuration if you have the Enable
password for the required privilege levels. The Enable Passwords for different
levels are configurable in the Enable Password parameter on the Management
Security web page.
GUI S
EB ETTINGS
5-30
page (Figure 5-19),