Mac Binding - Supermicro SSE-G24-TG4 User Manual

1/10 and 10-Gigabit Layer 2/3 Ethernet Switches User's Manual
Table 5-84. DHCP Pool Settings Page Parameters (Continued)
Parameter
End IP
Lease Time
Utilization Threshold
Domain name
DNS Server
Netbios Name Server This parameter specifies the IP address of netbios name server for this pool.
Netbios Node
Default Router

MAC Binding

Clicking the MAC B
which allows you to configure parameters for DHCP MAC binding. The parameters for
this page are shown in
Description
This parameter specifies the last IP address in the address pool that is used for
dynamic allocation by the DHCP server.
This parameter specifies the time interval for which the IP address is valid.
This parameter specifies the DHCP Pool Utilization Threshold value. The
allowed value ranges between 0 and 100.
This parameter specifies the domain name for address pool.
This parameter specifies the IP address of DNS server for this pool.
You can either choose the Netbios node to be specified as Number, B Node, H
Node, M Node or P Node.
Specifies the default router address for this pool.
Figure 5-103. DHCP MAC Bindings Page
link brings up the DHCP MAC B
INDINGS
Table 5-85.
5-124
page (Figure
INDING
5-103),