Acl; Mac Acl; Ip Standard Acl; Ip Extended Acl - Supermicro SSE-G24-TG4 User Manual

Clicking the L
OGGING
which allows you to configure logging parameters. The parameters for this page are
shown in Table
Table 5-9. Syslog Configuration Page Parameters
Parameter
Syslog
Server IP Address
Buffer Size
Timestamp
Console Log
MAC Address Log
Facility
Traps
File Max Size
File Min Size
Buffer Entries
File Entries

ACL

The ACL link allows you to configure the Access Control List for the switch. You can
configure ACL on the following three pages:
•

MAC ACL

•

IP Standard ACL

•

IP Extended ACL

tab brings up the S
5-9.
Description
This parameter enables or disables the Syslog feature.
This parameter specifies the Syslog server IP address. Make sure the Server IP
is reachable.
The buffer size is specfied in log entries. Max entries buffered is 200.
This parameter allows you to enable or disable the adding of a time stamp to the
log messages.
This parameter allows you to enable or disable logging to the console.
Enable or disable logging of the MAC address table update in syslog. By default
MAC address logging is disabled.
This parameter allows you to select supported facilities. The switch supports
syslog standard supported facilities
5, 6,
LOCAL LOCAL LOCAL
This parameter helps you to select a particular trap type. The following types of
traps are supported A
I , N
NFORMATIONAL OTIFICATION
Specifies the maximum size of the file entries. The default is 4096.
Specifies the minimum size of the file entries. The default size is 2048.
Displays the currently available number of log entries in syslog buffers.
Displays the currently available number of log entries in syslog files.
Chapter 5: Web Based Management Utility
C
YSLOG ONFIGURATION
0,
LOCAL
7 and .
USER
, C , D
LERTS RITICAL EBUGGING
and W
ARNINGS
5-25
page (Figure
1, 2,
LOCAL LOCAL LOCAL
, E , E
MERGENCIES
.
5-15),
3, 4,
LOCAL
,
RROR