Snmp Trap Settings - Supermicro SSE-X3348T/R User Manual

Table 5-21. SNMP Security Settings Page Parameters (Continued)
Parameter
Privacy Key
Storage Type

SNMP Trap Settings

Clicking the T
RAP
which configures the set of management targets that must receive notifications. The
parameters for this page are shown in
Table 5-22. SNMP Trap Settings Page Parameters
Parameter
Notify Name
Notify Tag
Notify Type
Storage Type
Description
P K is an indication of whether or not messages sent on behalf of this
RIVACY EY
user to/from the SNMP are protected from disclosure.
S T can be configured as Volatile or Non-Volatile.
TORAGE YPE
Figure 5-28. SNMP Trap Settings Page
M tab brings up the SNMP T
ANAGER
Description
N N is a unique identifier associated with the entry.
OTIFY AME
N T contains a single tag value, which is used to select entries in the
OTIFY AG
Target Address table. Any entry in the Target Address table that contains a tag
value equal to the value of an instance of this Trap Manager, is selected.
The type of notification of the SNMP Trap Settings can be configured as Trap or
Inform.
S T can be configured as Volatile or Non-Volatile.
TORAGE YPE
Chapter 5: Web Based Management Utility
RAP
Table 5-22.
5-41
S page (Figure
ETTINGS
5-28),