Filters - Supermicro SSE-G24-TG4 User Manual

Filters

Clicking the F
ILTERS
(Figure 5-139). The parameters for this page are shown in
Table 5-119. RRD6 Filter Configuration Page Parameters
Parameter
IPv6 address
Prefix Length
Source
Destination
Action
Figure 5-139. RRD6 Filter Configuration Page
tab brings up the RRD6 F
Description
This parameter specifies the IPv6 Address.
This parameter indicates the length of the prefix (in bits) associated with this
entry's IPv6 address.
This parameter denotes the address of the Source.
This parameter specifies the address of the Destination.
With this parameter you can either choose to Permit (not to filter) or Deny (Filter)
for the above configuration set.
Chapter 5: Web Based Management Utility
C
ILTER ONFIGURATION
5-165
page
Table 5-119.