System Settings - Supermicro SSE-G24-TG4 User Manual

1/10 and 10-Gigabit Layer 2/3 Ethernet Switches User's Manual

System Settings

The following pages can be accessed through the System Settings link:
• System Settings
• System Version
System Settings
Clicking the S
YSTEM
This page provides system related information and also helps you configure system
specific parameters.
Parameter
Device Name
Switch Base MAC Address This displays the MAC Address of the switch.
Serial Number
SNMP Engine ID
Device Contact
Figure 5-2. System Settings Page
I tab brings up the S
NFORMATION
Table 5-2 lists the parameters found on this page.
Table 5-2. System Information Page Parameters
Description
Assigns a name to identify this device – 15 Characters input limit. The
factory default is SMIS.
This displays the serial number of the switch.
Sets the SNMP engine ID with 5 to 32 hexadecimal characters separated
by dots for the local or remote SNMP engine. A restart of the switch
required if these values are changed. The factory default is
80.00.08.1c.04.46.53
Assigns a contact person's name with a 255-character input limit. The
factory default is http://www.supermicro.com/support.
YSTEM
5-10
S page (Figure
ETTINGS
5-2).