Table 5-108. BGP Peer Configuration Page Parameters (Continued)
Parameter
Admin Status
Status
Multi-Exit Disc
Clicking the M
ULTI
(Figure
5-128), which allows you to configure the MED value for routes learnt from BGP
peers. The parameters for this page are shown in
Table 5-109. BGP MED Configuration Page Parameters
Parameter
MED ID
Remote AS
IP Address Prefix
IP Address Prefix
Length
Intermediate AS
Description
This parameter displays the admin status of the entry.
This parameter specifies the status of the entry.
Figure 5-128. BGP MED Configuration Page
-E
D
tab brings up the BGP MED C
XIT
ISC
Description
This parameter specifies the index for this table. The allowed value ranges
between 1 and 10.
This parameter specifies the AS number from which the route update is
received. The allowed value ranges between 0 and 65535.
This parameter specifies the IP address prefix for which the update is received.
This parameter is used to calculate the subnet. The allowed value ranges
between 0 and 32.
This parameter represents the intermediate AS between the BGP peers.
Chapter 5: Web Based Management Utility
Table
5-109.
5-153
page
ONFIGURATION