Nd Cache - Supermicro SSE-G24-TG4 User Manual

1/10 and 10-gigabit layer 2/3 1/10-gigabit ethernet switch, 1/10-gigabit ethernet switch, 10/40-gigabit ethernet switch, 10/40-gigabit ethernet switch, 10/40-gigabit ethernet switch
Hide thumbs Also See for SSE-G24-TG4:
Table of Contents

Advertisement

1/10 and 10-Gigabit Layer 2/3 Ethernet Switches User's Manual
Table 5-78. IPv6 Interface Settings Page Parameters (Continued)
Parameter
Hop Limit
Def-Rtr Time
RA Rch Time
RA Retrans Time
Prefix-Adv Status
RA Interval
DAD Retries

ND Cache

Clicking the ND C
The parameters for this page are shown in
Description
This parameter denotes the Hop Limit value to be placed in the Router
Advertisements sent on the Interface. The allowed value ranges from 1 to 255.
The default value is 64.
This parameter specifies the Default router lifetime to be placed in the Router
Advertisements sent on the interface. The allowed value ranges from 0 to 9000.
The default value is 1800.
This parameter indicates the Reachable time to be placed in the Router
Advertisements sent on the interface. The allowed value ranges from 0 to 3600.
The default value is 30.
This parameter specifies the RA Retransmit time to be placed in the Router
Advertisement sent on the interface. The allowed value ranges from 1 to 3600.
The default value is 1.
This parameter specifies the Prefix Advertisement status on the Interface.
This parameter specifies the minimum time in seconds allowed between sending
unsolicited router advertisements. The allowed value ranges from 3 to 1800. The
default value is 600.
This parameter specifies the maximum number of Duplicate Address Detection
retries. The allowed value ranges from 1 to 10. The default value is 1.
Figure 5-97. ND Cache Configuration Page
tab brings up the ND C
ACHE
C
ACHE
ONFIGURATION
Table
5-79.
5-118
page
(Figure
5-97).

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents