1/10 and 10-Gigabit Layer 2/3 Ethernet Switches User's Manual
PIM
The PIM link allows you to perform PIM related configuration through the following
pages:
•
Basic Settings
•
Component
•
Interfaces
•
Candidate RPs
•
Threshold
•
Static RP
Basic Settings
Clicking the B
ASIC
which specifies the PIM status in the switch. The parameters for this page are shown in
Table
5-133.
Parameter
PIM Status
PIM V6 Status
Figure 5-156. PIM Basic Settings Page
S
tab brings up the PIM B
ETTINGS
Table 5-133. PIM Basic Settings Page Parameters
Description
This parameter allows you to enable or disable the PIM status in the switch.
This parameter allows you to enable or disable the PIM V6 status in the switch.
S
ASIC
5-182
page
(Figure
ETTINGS
5-156),