Prefix Settings - Supermicro SSE-G24-TG4 User Manual

Table 5-81. Address Profile Settings Page Parameters (Continued)
Parameter
Valid Flag
Preferred Flag

Prefix Settings

Clicking the P
REFIX
(Figure 5-100). The parameters for this page are shown in
Table 5-82. Prefix Configuration Page Parameters
Parameter
Interface VLAN ID
Prefix
Prefix Length
Prefix Profile ID
Description
This parameter specifies if the Valid Lifetime Flag is Variable or Fixed.
This parameter specifies if the Preferred Lifetime Flag is Variable or Fixed.
Figure 5-100. Prefix Configuration Page
S tab brings up the P
ETTINGS
Description
This parameter specifies the index of the VLAN Interface. The allowed value
ranges between 1 to 255.
This parameter indicates the IPv6 address prefix to be advertised in RA.
This parameter indicates the P
This parameter specifies index to the IPv6 address profile table. The allowed
value ranges between 0 to 200.
Chapter 5: Web Based Management Utility
C
REFIX ONFIGURATION
L (in bits).
REFIX ENGTH
5-121
page
Table 5-82.