Local Pref - Supermicro SSE-G24-TG4 User Manual

1/10 and 10-Gigabit Layer 2/3 Ethernet Switches User's Manual
Table 5-109. BGP MED Configuration Page Parameters (Continued)
Parameter
Direction
Value
Preference
Status

Local Pref

Figure 5-129. BGP Local Preference Configuration Page
Clicking the L
OCAL
page (Figure 5-129), which allows you to configure the Local Preference value for
routes. The parameters for this page are shown in
Table 5-110. BGP Local Preference Configuration Page Parameters
Parameter
Local Preference ID
Remote AS
IP Address Prefix
Description
This parameter can be set for the incoming or the outgoing packets using In and
Out values.
This parameter specifies the MED value to be associated with this path learned.
The allowed value ranges between 0 and 32.
This parameter is used to enable/disable filtering.
This parameter indicates the status of the entry.
P tab brings up the BGP L
REF
Description
This parameter specifies the Local Preference ID, which is the index for this
table. The allowed value ranges between 1 and 10.
This parameter specifies the AS number from which the route update is
received. The allowed value ranges between 0 and 65535.
This parameter specifies the IP Address prefix for which the update is received.
P
OCAL REFERENCE
Table 5-110.
5-154
C
ONFIGURATION