Target Address - Supermicro SSE-G24-TG4 User Manual

Table 5-18. SNMP View Tree Settings Page Parameters (Continued)
Parameter
View Type
Storage Type

Target Address

Clicking the T
ARGET
(Figure 5-25), which configures SNMP target address parameters. The parameters for
this page are shown in
Table 5-19. SNMP Target Address Settings Page Parameters
Parameter
Target Name
Target IP Address
Target Timeout
Target Retries
Transport Tag
Description
This parameter specifies whether a View Type is Included or Excluded.
Use this parameter to specify whether the Storage Type is volatile or
non-volatile.
Figure 5-25. SNMP Target Address Settings Page
A tab brings up the SNMP T
DDRESS
Table 5-19.
Description
This parameter specifies a Target Name as a unique identifier.
The Target IP Address specifies a target address to be used in the generation of
SNMP operations.
Target Timeout specifies the maximum round trip for communicating with the
Target IP Address.
Target Retries specifies the number of attempts to be made when no response is
received
The Transport Tag value is used to select a target address for a particular
operation.
Chapter 5: Web Based Management Utility
ARGET
5-37
A S
DDRESS ETTINGS
page