Mroute Info - Supermicro SSE-G24-TG4 User Manual

Mroute Info

Clicking the M
ROUTE
(Figure 5-214), which displays PIM route information. The parameters for this page are
shown in Table
Table 5-188. PIM Route Information Page Parameters
Parameter
Component
Source
Group
Up Time
Expiry Time
RP Address
Incoming Interface
RPF Neighbor Addr
Route Flags
Name
State
Mode
Figure 5-214. PIM Route Information Page
I tab brings up the PIM R
NFO
5-188.
Description
This parameter specifies the PIM Component Identifier.
This parameter specifies the source address.
This parameter specifies the group address.
This parameter specifies the up time in seconds.
This parameter specifies the expiry time in seconds.
This parameter specifies the RP Address.
This parameter specifies the Incoming Interface Name.
This parameter specifies the RPF Neighbor Address.
This parameter specifies the SPT Bit or Wild Card Bit or RPT Bit.
This parameter specifies the Outgoing Interface Name
This parameter specifies the Outgoing Interface State.
This parameter specifies the Outgoing Interface Mode.
Chapter 5: Web Based Management Utility
I
OUTE NFORMATION
5-251
page