Rip6 - Supermicro SSE-G24-TG4 User Manual

RIP6

Clicking the RP6 tab brings up the RRD RIP
The parameters for this page are shown in
Table 5-121. RRD RIPv6 Configuration Page Parameters
Parameter
Status
Default Metric
Export
Figure 5-141. RRD RIPv6 Configuration Page
Description
This parameter enables or disables redistribution for RIP6.
This parameter specifies the metric for the routes that are being re-distributed.
The allowed value ranges from 0 and 16. The default value is 0.
With this parameter you can choose to export Direct Routes, Static Routes or
OSPFv3 Routes.
Chapter 5: Web Based Management Utility
6 C
V ONFIGURATION
Table 5-121.
5-167
page (Figure 5-141).