1/10 and 10-Gigabit Layer 2/3 Ethernet Switches User's Manual
DVMRP
The DVMRP page allows you to configure the DVMRP protocol using the following
pages:
•
Basic Settings
•
Interfaces
Basic Settings
Clicking the B
ASIC
(Figure
5-162). The parameters for this page are shown in
Table 5-139. DVMRP Basic Settings Page Parameters
Parameter
DVMRP Status
Prune Lifetime
(Seconds)
Figure 5-162. DVMRP Basic Settings Page
S
tab brings up the DVMRP B
ETTINGS
Description
DVMRP can be enabled or disabled in the switch using this field.
This parameter represents the Prune Life Time Configuration value. The allowed
value ranges between 1 and 7200.The default value is 50.
ASIC
5-188
S
page
ETTINGS
Table
5-139.