Qos; Basic Settings - Supermicro SSE-G24-TG4 User Manual

1/10 and 10-Gigabit Layer 2/3 Ethernet Switches User's Manual

QoS

The QoS link of the System page opens the QoS Basic Settings page. This page allows
you to configure QoS through following pages:
•

Basic Settings

• Classmap
• Policymap
Basic Settings
Clicking the B
ASIC
which allows you to configure QOS basic settings parameters. The parameters for this
page are shown in
Parameter
System Control
Status
Figure 5-35. QOS Basic Settings Page
S tab brings up the QOS B
ETTINGS
Table 5-28.
Table 5-28. QOS Basic Settings Page Parameters
Description
With this parameter S
This parameter allows enabling/disabling of the QoS status.
ASIC
C can Start or Shutdown QoS.
YSTEM ONTROL
5-48
S page (Figure
ETTINGS
5-35),