Advanced - Supermicro SSE-G24-TG4 User Manual

Table 5-112. BGP Route Aggregation Configuration Page Parameters
Parameter
ID
IP Address Prefix
IP Address Prefix
Length
Route Advertise
Status

Advanced

Clicking the A
DVANCED
(Figure 5-132), which configures dampening and confederation parameters. The
parameters for this page are shown in
Description
This parameter specifies the index to this table. The allowed value ranges
between 1 and 10.
This parameter specifies the IP address prefix that needs to be aggregated.
This parameter, in combination with the IP Prefix, decides the aggregated route
to be distributed by this switch. The allowed value ranges between 0 and 32.
With this parameter you can either choose to advertise only the aggregated
routes by setting Summary only, or choose to advertise all routes by setting All.
This parameter specifies the status of the entry.
Figure 5-132. Advanced BGP Configuration Page
tab brings up the A
Chapter 5: Web Based Management Utility
BGP C
DVANCED
Table 5-113.
5-157
page
ONFIGURATION