Target Parameter - Supermicro SSE-G24-TG4 User Manual

1/10 and 10-Gigabit Layer 2/3 Ethernet Switches User's Manual
Table 5-19. SNMP Target Address Settings Page Parameters (Continued)
Parameter
Param
Storage Type

Target Parameter

Figure 5-26. SNMP Target Parameter Settings Page
Clicking the T
ARGET
page (Figure 5-26), which configures SNMP Target Address parameters. The
parameters for this page are shown in
Table 5-20. SNMP Target Parameter Settings Page Parameters
Parameter
Parameter Name
MP Model
Security Model
Security Name
Description
Param contains SNMP parameters to be used when generating messages to be
sent to a transport address.
Use this parameter to specify whether the Storage Type is volatile or
non-volatile.
P tab brings up the SNMP T
ARAMETER
Description
The target parameter is an unique name that specifies SNMP target information
to be used in the generation of SNMP messages.
The Message Processing (MP) Model is used when generating SNMP
messages using this entry.
The Security Model is used when generating SNMP messages using this entry.
The Security Name identifies the current Parameter Name, on whose behalf
SNMP messages will be generated.
Table 5-20.
5-38
P S
ARGET ARAMETER ETTINGS