Filters; Ospf; Basic Settings - Supermicro SSE-G24-TG4 User Manual

1/10 and 10-Gigabit Layer 2/3 Ethernet Switches User's Manual

Filters

Clicking the F
ILTERS
The parameters for this page are shown in
Table 5-94. RIP6 Filter Configuration Page Parameters
Parameter
Filter Address
Filter Type

OSPF

The OSPF link allows you to configure the OSPF protocol through the following pages:
•

Basic Settings

• Area
• Interface
• Virtual Interface
• Neighbor
• RRD Route
• Aggregation
• AsExtAggregation
Figure 5-113. RIP6 Filter Configuration Page
tab brings up the RIP6 F
Description
This parameter specifies the F
This parameter specifies the F
C
ILTER ONFIGURATION
Table 5-94.
A for the RIP6 interface.
ILTER DDRESS
T for which RIP6 needs to be configured.
ILTER YPE
5-134
page (Figure 5-113).