1/10 and 10-Gigabit Layer 2/3 Ethernet Switches User's Manual
The SSE-X24S and SSE-X24SR are fully self-contained; no additional modules are
required. The SSE-X3348S and SSE-X3348SR are also fully self contained, as are the
SSE-X3348T and SSE-X3348T/R. All of the 10G switches contain two redundant
hot-swappable power supplies installed at the factory. The SSE-X24S, SSE-X3348S
and SSE-X3348T have a "normal" airflow direction for cooling – from the front of the unit
to the back. The SSE-X24SR, SSE-X3348SR and SSE-X3348T/R have a "reverse"
airflow direction for cooling – from the back of the unit to the front. The models are
otherwise identical. The SSE-X24SR, SSE-X3348SR or SSE-X3348T/R may be more
appropriate for large data center installations with the switch installed in the rear of a
rack facing the "hot aisle".
1-3
Product Checklist of Typical Components
The following components are included with SSE-G24-TG4 or SSE-G48-TG4 Layer 2/3
1/10-Gigabit Ethernet switches:
•
Serial cable
•
Power cables
•
Mounting Ears for rack assembly (see note)
•
Two 10-Gb/s port module bays for either CX-4, XFP, or SFP+ ports (modules sold
separately)
•
CD-ROM with manuals
The following components are included with the SSE-X24S/R switches:
•
Power Cables (2)
•
Mounting ears for rack assembly (see note)
•
CD-ROM with manuals
The following components are included with the SSE-X3348S/R and SSE-X3348T/R
switches:
•
Power cables
•
Console Cable
•
Mounting ears for rack assembly (see note)
•
Quick Installation Guide
NOTE: The mounting ears can secure an SSE-X24S/R or SSE-X3348S/R switch to a rack,
but will not reliably support the full weight of the switch for an extended period of time.
Please use Supermicro mounting rails (CSE-PT52L) for full support of the switch in a rack
installation (see Appendix A for details).
1-2