Table 5-96. OSPF Area Configuration Page Parameters (Continued)
Parameter
Send Summary
Router
Metric
Interface
Clicking the I
NTERFACE
(Figure
5-116). The parameters for this page are shown in
Table 5-97. OSPF Interface Configuration Page Parameters
Parameter
Interface
Area ID
Priority
Authentication Type
Description
This field is used to control the import of summary LSAs to stub areas. This does
not have any impact for other areas.
This parameter specifies the metric/cost associated with the routes. The allowed
value ranges between 0 to 16777215. The default value is 10.
Figure 5-116. OSPF Interface Configuration Page
tab brings up the OSPF I
Description
This parameter specifies the interface index of the port.
This parameter indicates the 32-bit integer uniquely identifying the area to which
the interface connects.
This parameter specifies the priority of this interface, which is used in the DR
election algorithm. The allowed value ranges between 0 and 255. The default
value is 1.
This parameter allows you to choose MD5, Simple Password or None as the
authentication type.
Chapter 5: Web Based Management Utility
NTERFACE
5-137
C
page
ONFIGURATION
Table
5-97.