SNMP AgentX
Figure 5-29. SNMP AgentX Subagent Settings Page
Clicking the A
GENT
(Figure
5-29), which allows you to configure SNMP Agentx sub-agent parameters. The
parameters for this page are shown in
Table 5-23. SNMP AgentX Subagent Settings Page Parameters
Parameter
Transport Domain
IP Address Type
Master IP Address
Master Port No
X link brings up the SNMP A
Description
This parameter allows you to specify the TCP.
This parameter specifies IPv4 or IPv6 for the IP A
This parameter specifies the Master Agent IP address.
This parameter specifies the Master Port number. Allowed values range from 0
to 65535. The default value is 705.
Chapter 5: Web Based Management Utility
X S
GENT
UBAGENT
Table
5-23.
5-41
S
page
ETTINGS
T
.
DDRESS
YPE