Area - Supermicro SSE-G24-TG4 User Manual

1/10 and 10-Gigabit Layer 2/3 Ethernet Switches User's Manual

Area

Clicking the A
REA
parameters for this page are shown in
Table 5-105. OSPFv3 Area Settings Page Parameters
Parameter
Area ID
Type
Area Summary
Stub Metric
NSSA Translator
Role
NSSA Stability
Interval
Stub Metric Type
Figure 5-124. OSPFv3 Area Settings Page
tab brings up the OSPF
Description
This parameter uniquely identifies an area.
This parameter indicates whether an area is a Stub area, NSSA, or Standard
(normal) area.
This parameter controls the import of Inter-Area LSAs into stub areas. This can
be noAreaSummary or sendAreaSummary.
This parameter indicates the metric value advertised for the default route into
Stub area and NSSA.
This parameter specifies the NSSA Border router's ability to perform NSSA
translation of type-7 LSAs into type-5 LSAs.
This parameter specifies the number of seconds after an elected translator
determines its services are no longer required, in which it must continue to
perform its translation duties.
This parameter specifies the type of metric (OSPFv3 Metric, External Type 1,
External Type 2) advertised as a default route.
3 A S
V REA ETTINGS
Table 5-105.
5-148
page (Figure 5-124). The