Filters - Supermicro SSE-G24-TG4 User Manual

Table 5-110. BGP Local Preference Configuration Page Parameters (Continued)
Parameter
IP Address Prefix
Length
Intermediate AS
Direction
Value
Preference
Status

Filters

Clicking the F
ILTERS
which is used to set the filters on the routes being learnt. The parameters for this page
are shown in Table
Description
This parameter is used to calculate the subnet. The allowed value ranges
between 0 and 32.
This parameter represents the intermediate AS between the BGP peers.
This parameter can be set for the incoming or the outgoing packets using In and
Out values.
This parameter specifies the Local preference value to be associated with this
learnt path. The allowed value ranges between 0 and 2147483647.
This parameter is used to enable/disable filtering.
This parameter specifies the status of the entry.
Figure 5-130. BGP Filter Configuration Page
tab brings up the BGP F
5-111.
Chapter 5: Web Based Management Utility
C
ILTER ONFIGURATION
5-155
page (Figure 5-130),