Lldp - Supermicro SSE-G24-TG4 User Manual

Table 5-61. LA Port Settings Page Parameters (Continued)
Parameter
Port State
Aggregation State

LLDP

The LLDP link has the following configuration pages:
• Global Settings
• Interface Settings
Global Settings
Clicking the G
LOBAL
which helps you to configure LLDP global parameters. The parameters for this page are
shown in Table
Description
This parameter indicates the current state of the port with respect to Link
Aggregation. The possible states are
• Up in Bundle — The Port is an active member of the Port Channel.
• Up Individual — The Port is not a member of any Port Channel but its
Oper-Status is Up.
• Standby — The Port is a member of the Port Channel but is currently in
standby state.
• Down — The Ports Oper-Status is Down.
Specifies the state whether Static or Dynamic..
Figure 5-79. LLDP Global Settings Page
S tab brings up the G
ETTINGS
5-62.
Chapter 5: Web Based Management Utility
S
LOBAL ETTINGS
5-97
page (Figure 5-79),