Snmp Target Parameter Settings - Supermicro SSE-X3348T/R User Manual

Table 5-19. SNMP Target Address Settings Page Parameters (Continued)
Parameter
Param
Storage Type

SNMP Target Parameter Settings

Figure 5-26. SNMP Target Parameter Settings Page
Clicking the T
ARGET
page (Figure 5-26), which configures SNMP Target Address parameters. The
parameters for this page are shown in
Table 5-20. SNMP Target Parameter Settings Page Parameters
Parameter
Parameter Name
MP Model
Security Model
Security Name
Description
P contains SNMP parameters to be used when generating messages to be
ARAM
sent to a transport address.
Use this parameter to specify whether the S
non-volatile.
P tab brings up the SNMP T
ARAMETER
Description
The target parameter is an unique name that specifies SNMP target information
to be used in the generation of SNMP messages.
The Message Processing (MP) Model is used when generating SNMP
messages using this entry.
The S M
ECURITY ODEL
entry.
The S N identifies the current P
ECURITY AME
SNMP messages will be generated.
Chapter 5: Web Based Management Utility
TORAGE
Table 5-20.
is used when generating SNMP messages using this
ARAMETER
5-39
T is volatile or
YPE
P S
ARGET ARAMETER
N , on whose behalf
AME
ETTINGS