Snmp Target Address Settings - Supermicro SSE-X3348T/R User Manual

1/10 and 10-Gigabit Layer 2/3 Ethernet Switches User's Manual
Table 5-18. SNMP View Tree Settings Page Parameters (Continued)
Parameter
View Type
Storage Type

SNMP Target Address Settings

Clicking the T
ARGET
(Figure 5-25), which configures SNMP target address parameters. The parameters for
this page are shown in
Table 5-19. SNMP Target Address Settings Page Parameters
Parameter
Target Name
Target IP Address
Target Timeout
Target Retries
Transport Tag
Description
This parameter specifies whether a V
Use this parameter to specify whether the S
non-volatile.
Figure 5-25. SNMP Target Address Settings Page
A tab brings up the SNMP T
DDRESS
Table 5-19.
Description
This parameter specifies a T
The T IP A
ARGET DDRESS
of SNMP operations.
T T specifies the maximum round trip for communicating with the
ARGET IMEOUT
T IP A .
ARGET DDRESS
T R specifies the number of attempts to be made when no response
ARGET ETRIES
is received
The T T
RANSPORT AG
operation.
T
IEW YPE
N as a unique identifier.
ARGET AME
specifies a target address to be used in the generation
value is used to select a target address for a particular
5-38
is Included or Excluded.
T is volatile or
TORAGE YPE
A S
ARGET DDRESS ETTINGS
page