Ip Authorized Manager - Supermicro SSE-X3348T/R User Manual

IP Authorized Manager

Clicking the IP A
(Figure 5-12), which allows you to configure allowed management nodes for managing
the switch. The parameters for this page are shown in
Table 5-7. IP Authorized Manager Page Parameters
Parameter
IP Address
Subnet Mask
Port List (Incoming)
VLANs Allowed
Services Allowed
Figure 5-12. IP Authorized Manager Page
M tab brings up the IP A
UTH ANAGER
Description
This specifies the IP address of the manager. The default address of 0.0.0.0
indicates "Any Manager".
This specifies the sub-network mask for the specified IP address.
This lists the port through which the manager can access this switch. Ports can
be comma separated or provided as a range (for example Gi0/1 or Ex0/1). The
factory default is blank.
This parameter specifies the VLANs through which the manager can access this
switch. VLANs can be comma seperated or provided as range (for example 1,2,3
or 1-3 or 1,2-3).
These control buttons are used to indicate the service type, and can be one or
more of the following: T
Chapter 5: Web Based Management Utility
UTHORIZED
Table
, SSH, HTTP, HTTPS, SNMP or ALL.
ELNET
5-21
M page
ANAGER
5-7.