Pool Settings - Supermicro SSE-X3348T/R User Manual

Pool Settings

Clicking the P
OOL
which allows you to configure the IP address pool that can be used by the DHCP server
to allocate IP addresses. The parameters for this page are shown in
Table 5-79. DHCP Pool Settings Page Parameters
Parameter
Pool ID
Network
Subnet Mask
Start IP
End IP
Lease Time
Utilization Threshold
Status
Figure 5-96. DHCP Pool Settings Page
S link brings up the DHCP P
ETTINS
Description
This parameter specifies the pool ID to index among the different subnet pools
configured.
This parameter specifies the subnet of the IP address in the pool.
This parameter specifies the subnet mask of the IP address in the pool.
This parameter specifies the first IP address in the address pool that is used for
dynamic allocation by the DHCP server.
This parameter specifies the last IP address in the address pool that is used for
dynamic allocation by the DHCP server.
This parameter specifies the time interval for which the IP address is valid.
This parameter specifies the DHCP Pool Utilization Threshold value.
This parameter specifies the status of the entry.
Chapter 5: Web Based Management Utility
S
OOL
5-119
page (Figure
ETTINGS
Table 5-79.
5-96),