Connext Setup - Garmin G1000 NXi Pilot's Manual

8.7 CONNEXT SETUP

The Connext Setup Page allows for setting up the installed optional Flight Stream device for a Bluetooth
connection between the G1000 and a mobile device running the Garmin Pilot™ application.
The mobile device must be 'paired' with the G1000 in order to use the various functions. Pairing is accomplished
by first placing the G1000 in pairing mode by displaying the Connext Setup Page. The G1000 is 'discoverable'
whenever this page is displayed. The pairing operation is completed from the mobile device and the Garmin Pilot
application. See the device Bluetooth pairing instructions and the connection instructions in the Garmin Pilot
application.
Viewing the Connext Setup Page:
1) Turn the large FMS Knob on the MFD to select the Aux page group.
2) Turn the small FMS Knob to select the Connext Setup page.
Changing the Bluetooth Name:
1) While viewing the Connext Setup Page, press the FMS Knob to activate the cursor.
2) Turn the large FMS Knob to place the cursor in the 'Bluetooth Name' field.
3) Enter the desired name by using the large FMS Knob to select the character field, and the small FMS Knob
select the desired alphanumeric character for that field.
4) Press the ENT Key. The cursor is removed and the new name is displayed.
Enabling/Disabling Flight Plan Importing from Garmin Pilot:
1) While viewing the Connext Setup Page, press the FMS Knob to activate the cursor.
2) Turn the large FMS Knob to place the cursor in the 'Flight Plan Import' field.
3) Turn the small FMS Knob to select 'Enabled' or 'Disabled'.
4) Press the FMS Knob to remove the cursor.
Enabling/Disabling WiFi Database Importing from Garmin Pilot:
1) While viewing the Connext Setup Page, press the FMS Knob to activate the cursor.
2) Turn the large FMS Knob to place the cursor in the 'WiFi Database Import' field.
3) Turn the small FMS Knob to select 'Enabled' or 'Disabled'.
4) Press the FMS Knob to remove the cursor.
Enabling/Disabling Automatic Reconnection of a Specific Paired Device:
1) While viewing the Connext Setup Page, press the FMS Knob to activate the cursor.
2) Turn the large FMS Knob to highlight the desired paired device.
3) Turn the small FMS Knob to select 'Enabled' or 'Disabled'. Selecting 'Enabled' allows the system to automatically
connect to a previously paired device when detected.
4) Press the FMS Knob to remove the cursor.
190-02177-00 Rev. A
Garmin G1000 NXi Pilot's Guide for Cessna NAV III
ADDITIONAL FEATURES
411