Garmin G1000 NXi Pilot's Manual page 109

Cessna nav iii
Hide thumbs Also See for G1000 NXi:
Table of Contents

Advertisement

COM3 – Not used in Cessna Nav III aircraft.
6
COM 1/2 – Split COM Key. Allows simultaneous transmission on COM1 and COM2 by the pilot and copilot.
7
TEL – Not used in Cessna Nav III aircraft.
8
PA – Selects the passenger address system. The selected COM transmitter is deselected when the PA Key
9
is pressed. [182T, (T)182T, (J)182T, 206H, and (T)206H only.]
SPKR – Selects and deselects the cabin speaker. COM and NAV receiver audio can be heard on the
10
speaker.
MKR/MUTE – Selects marker beacon receiver audio. Mutes the currently received marker beacon receiver
11
audio. Unmutes automatically when new marker beacon audio is received. Also, stops play of recorded
COM audio.
HI SENS – Press to increase marker beacon receiver sensitivity. Press again to return to low sensitivity.
12
DME – Turns optional DME audio on or off.
13
NAV1 – When selected, audio from the #1 NAV receiver can be heard.
14
ADF – Turns optional ADF receiver audio on or off.
15
NAV2 – When selected, audio from the #2 NAV receiver can be heard.
16
AUX – Not used in Cessna Nav III aircraft.
17
MAN SQ – Enables manual squelch for the intercom. When the intercom is active, press the PILOT Knob
18
to illuminate the squelch annunciation. Turn the PILOT/PASS Knobs to adjust squelch.
PLAY – Press once to play the last recorded COM audio. Press again while audio is playing and the
19
previous block of recorded audio is played. Each subsequent press plays each previously recorded block.
Pressing the MKR/MUTE Key during play of a memory block stops play.
PILOT – Selects and deselects the pilot intercom isolation.
20
COPLT – Selects and deselects the copilot intercom isolation.
21
PILOT Knob – Press to switch between volume and squelch control as indicated by illumination of VOL
22
or SQ. Turn to adjust intercom volume or squelch. The MAN SQ Key must be selected to allow squelch
adjustment.
PASS Knob – Turn to adjust Copilot/Passenger intercom volume or squelch. The MAN SQ Key must be
23
selected to allow squelch adjustment.
DISPLAY BACKUP Button – Manually selects Reversionary Mode.
24
190-02177-00 Rev. A
Garmin G1000 NXi Pilot's Guide for the Cessna Nav III
AUDIO PANEL AND CNS
95

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents